User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
22 Basic Operations
4. Choose Night to access the current record schedule and quality for Night-time
hours.
5. Make changes or make sure settings are appropriate for Night recording.
6. Press Esc to return to the Record menu and make appropriate changes to other
record parameters.
7. Press Esc to leave the Record menu and save your changes.
NOTE: Be sure to save your settings using Save Administrator Setting in the
Save/Load Default option on the Main Menu (see
Saving and loading a
Configuration on page 72). Later, you can reload your settings using Load
Administrator Setting, or reload the factory settings using Load Factory
Setting.
8. Press Esc until the Exit menu is displayed. Select Save and Exit to save your
settings and exit the Main Menu.
Playback Operations
The Playback feature allows simultaneous playback during recording, multiple
playback in all screen formats, VCR-type playback controls, date and time search
features, and alarm playback.
You can switch between live and playback mode to play back video recorded by one
or multiple cameras while the DigiMux continues recording. This capability is
especially helpful in alarm event playback. Follow the playback instructions in the
sections below to play back specific video.
NOTE: Playback in PIP view mode includes both recorded and live video. The small
view display area contains live video, and the large view display area contains
the requested recorded video.
Night
1 Start Time 18:00
2 Stop Time 06:00
3 Normal Rec IPS 30
4 Normal Rec Quality Standard
5 Event Rec IPS 30
6 Event Rec Quality Standard
7 Event Active Both
8 Event Record Mode Unchanged