User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index

DigiMux
Basic Operations 19
Digital Zoom (2x)
Any camera in full screen view can be zoomed to 2x. To zoom the camera and then
return to full screen view, follow these steps:
1. Press Camera (1 - 16) to select a specific camera in full screen view.
2. Press Zoom to enter Zoom mode.
3. To move (pan/tilt) the zoomed area around the original image, use the Direction
keys.
4. Press Zoom a second time, or press ESC to return the view to the original size and
leave Zoom mode.
Pause/Freeze
Pause, or Freeze, freezes a live view or stops video playback for further examination
of a particular section of video. To pause and resume a live view, follow these steps:
1. Press Camera to select the camera in full view.
2. Press Pause to freeze the live image.
3. Press Pause again to resume the live camera view.
NOTE: When you press Pause while viewing live video, the image freezes but the
date/time information does not. The clock continues to run.
To pause and resume a video playback, follow these steps:
1. Press Camera to select the camera in full view.
2. Press Pause to freeze the current playback image.
3. Press Right or Left Direction keys to resume the playback operation.
Call Monitor
The Call Monitor displays full screen video of all installed cameras in sequence. The
use of the Call Monitor avoids having to zoom the Main monitor window or change
the layout of windows in any way in order to see the full detail of cameras with
important activity in real time.
During normal operation, the Call Monitor displays a programmable sequence of
cameras. During an alarm, however, the Call Monitor switches automatically to the
camera on which the alarm channel is activated. If more than one alarm occurs
simultaneously, the Call Monitor displays all affected cameras in sequence, if enabled.