User`s manual

User’s Manual
18 Basic Operations
Automatic Sequencing Mode
Automatic sequencing allows you to use any view format and sequence all camera
input views. After you select a view format, press Seq to toggle the automatic
sequencing mode. The main monitor updates the screen every few seconds with the
next series of camera views.
The following figure displays the sequence used with 2 x 2 (four cameras) and 3 x 3
(9
cameras) view modes:
Viewing Live Cameras and Recorded Playback
The Playback key switches the display between Live camera view and Record
playback. When the LED in the Playback key is OFF, all the displayed windows
contain live video images. When the LED is lit, at least one window contains Record
playback. Windows that contain playback video display the OSD camera titles and
Date/Time stamps in reverse-video format.
The window cursor is displayed in a multiple camera view display when you press
Set. If you press the Playback key when the window cursor is not displayed, all of
the windows are switched between live and playback. If the window cursor is visible,
only the window selected by the cursor is switched to playback.
Figure 5 — Automatic Sequencing for 2x2, 3x3, and PIP Viewing Modes
12
34
123
456
789
56
78
910
11 12
13 14
15 16
8910
11 12 13
14 15 16
Sequence with 4 (2x2) camera view mode
Sequence with 9 (3x3) camera view mode
Sequence with PIP camera view mode
1
2
3
4
Etc.