User`s manual

DigiMux
Basic Operations 17
Playback in PIP mode allows you to view live and recorded video. The small view
display area contains live video, and the large view display area contains the
requested recorded video. For more information on playback operations, see
Playback
Operations on page 22.
Assigning Cameras to Windows
You can assign a camera to each of the windows, or cameos, in the Main Monitor
display. Playback images from the assigned camera are viewed in the window by
switching the window between Live and Record modes (See
Viewing Live Cameras and
Recorded Playback on page 18). To assign a camera to a window, follow these steps:
1. Press the Set key. The window cursor appears as a highlighted frame around one
of the windows.
2. Move the window cursor to the desired window using the Direction keys.
3. Press a Camera select key to assign the camera to the selected window.
4. Press Set to end the assignment.
NOTE: If you are using the SET button to set up an Active Window or to arrange a
cameo display, and an alarm is triggered during that process, the cursor
returns to cameo one after the alarm occurs.
Select Active Window
The DigiMux allows you to select one window in a multi-camera live view to be the
Active Window. The Active Window is displayed in a close approximation of real
time, allowing you to see more detail of motion in that window.
To use this feature, press the Set key to display the window cursor. Press the
Direction keys (Left, Right, Up, and Down) to position the window cursor in a
selected window. The window highlighted by the window cursor automatically
becomes the Active Window. Press Set again to exit Select Active Window mode.
NOTE: If you are using the SET button to set up an Active Window or to arrange a
cameo display, and an alarm is triggered during that process, the cursor
returns to cameo one after the alarm occurs.
This feature can also be used in Playback mode to select one window for playback
video. See
Viewing Live Cameras and Recorded Playback on page 18.