User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
14 Basic Operations
Function Keys
The DigiMux function keys on the front panel for normal operation are described in
the table below.
REC Green LED should be lit while the DigiMux is recording. If
Circular Record is OFF, this LED should start blinking
when the HDD storage is full (and the buzzer should
beep if the buzzer is enabled).
IR sensor dark
burgundy
red
Sensor that is used with an IR remote control, such as
DigiRemote (see
Appendix E: DigiRemote on page 130).
LED COLOR DESCRIPTION
FUNCTION
KEY
DESCRIPTION
Esc Press to cancel or exit from certain modes and menus.
Menu Press to call the setup menu.
Seq Press to enter automatic sequential sequencing mode. See Automatic
Sequencing Mode on page 18.
Mode Select the format for the Main Monitor display. Each time you press
Mode, the Main Monitor displays one of five different available
view formats. See
Main Monitor View Formats on page 16.
Set Used to assign a camera to one of the windows on the monitor. See
Assigning Cameras to Windows on page 17.
In live and full screen mode, press this SET button to switch to
Dome Control mode. See
Dome Control on page 28 for more
information.
Lock Press for 3 seconds to lock/unlock the keypad, in order to prevent
accidental changes to the system setup. The Lock key remains lit
when the keypad is locked.
Pause
(Freeze)
Press to freeze the live video or pause the playback image on the
monitor. Press Pause again to resume live video. Press Left or Right
to resume playback video forward or reverse, respectively. See
Pause/Freeze on page 19.
NOTE: When you press Pause while viewing live video, the image
freezes but the date/time information does not. The clock
continues to run.