User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
6 Overview
About Shutting Down, Powering Up, or Rebooting DigiMux
Your DigiMux contains a powerful, sophisticated operating system. If you must shut
down the unit for any reason, use the proper shut down and power up procedures to
protect the unit.
NOTE: Connect short term storage devices, such as USB ThumbDrives
®
, USB Hard
Disk Drives, USB CD-RWs, etc., only after the DigiMux is successfully
powered up. For more information, see
Shutdown and Power Up on page 99.
To shut down your unit and restart it, or reboot the unit, follow this procedure:
•Press 4 + ESC simultaneously to shut down the unit.
This action completely shuts down the unit. Please wait for the unit to shut down
completely before removing the power. During shut down, the color bar is displayed
on the monitor. The function key LEDs are lit, then turn off. The monitor and fan then
shut down. Only the power light is on when the unit is shut down.
To restart the unit:
• Press and hold 1 + ESC for 3 seconds.
The blue splash screen is displayed on the monitor and the front panel keys light up
in sequence until the unit is completely restarted.