User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
DigiMux
Appendices 141
Function (9) plus
Number
1 (11) plus
Sequence (4)
Press these keys to enter Sequence mode. To return
to Live View mode, press the same keys.
Playback (29) Press to toggle between playback recorded video
and live video.
Pause (21) Press to freeze the image on the monitor in Playback
mode.
Joystick (25) In Zoom mode or OSD (display), they function as
Direction keys. In Playback mode, Left and Right
are reverse video and forward video, Up is Go To
(search by Date/Time), Down is Event List.
In Dome Control Mode, the Direction keys are used
to pan and tilt a camera (move the camera
horizontally and vertically, respectively.)
Enter / Zoom (26) In a menu or selection interface, the Enter key
makes the selection or saves settings. In a display
mode (e.g., a specific camera selected), it functions
as a Zoom key.
Multiscreen (3) Press to change the display mode. The display
mode can be changed to full-screen, quad (four),
nine, or sixteen window displays.
Clear (1) Press to cancel or exit from certain modes and
menus.
Telemetry Enable/Disable
(19)
Used to assign a camera to one of the windows on
the monitor. Also used to enable Dome Control
when in Full Screen mode.
Shift (5), then Menu (2) OSD Main Menu access.
Shift (5), then Pause (21) Toggles Lock on the unit.
FUNCTION KEY DESCRIPTION