User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
140 Appendices
Run a Pattern
•Press Shift (5), then press Number (11) for the number of the desired pattern.
Press Preset (7).
Focus, Iris, and Zoom control
•Focus key Focus In/Out (15)
•Iris key Close/Open Iris (16)
• Zoom key Zoom In/Out (17)
Playing Back Video
•Press Start (29) to toggle between Playback and Live Video modes.
• The following keys can be used to control video playback:
• Increase play speed, play forward Fast Forward (24)
• Decrease play speed, play in reverse Rewind (23)
• Pause or freeze the image Pause (21)
•Joystick (25) Down while in Playback mode to play back by time and date. Joystick
(25) Up/Down to move between the date and time fields. Joystick (25) Left/Right
to select values. Press Enter (26) to play back the video.
•Joystick (25) Down while in Playback mode to view the Event List. Joystick (25)
Left/Right to move between screens, or Up/Down to move through the list.
Highlight an event and press Enter (26) to play back the selected event.
Basic Keyboard Functions
The function keys on your ControlCenter 200 or 300 keyboard correspond to functions
on your DigiMux. Remember to press Telemetry Enable/Disable (19)
to enter Dome Control Mode from Full Screen Display Mode, and Clear (1) to return.
The function keys are described in the following table:
FUNCTION KEY DESCRIPTION
Number (11) plus Camera Use to view specific camera views, or select specific
cameras in OSD menus. The number of active keys
corresponds to the number of channels supported
by the unit (4, 9 or 16 channels).
Multiscreen (3) Use to change the viewing mode, e.g., from Full
Screen view to quad view.
Freeze (6) Use to freeze the image in Live Video mode.