User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
DigiMux
Appendices 139
Basic DigiMux Control with the ControlCenter Keyboards
The following sections discuss how to use the ControlCenter 200 or 300 keyboard to
perform basic actions on the DigiMux unit. The numbers next to button names
indicate the number in the above table and diagram.
How to Enter the Main Menu and Passcode
• To enter the Main Menu, press Shift (5) and then Menu (2), in succession.
The User Authorization screen is displayed.
• To enter your passcode, press Number (11) for the number, then press Camera
(13). Enter each number in this way. For example, to enter 1234, enter:
1 + Camera + 2 + Camera + 3 + Camera + 4 + Camera
How to Navigate a Menu
•Joystick (25) Up or Down allows you to navigate up and down menu lists.
• To select an item, press Enter (26).
•Joystick (25) Left or Right allows you to change values that require the Left/Right
direction buttons on the DigiMux.
• To exit a menu, press Clear (1).
Controlling Dome Cameras
•Press Number (11) for the number, then press Camera (13) to place the desired
camera in Full Screen View mode.
•Press Telemetry Enable/Disable (19) to enter Dome Control mode.
• Use the joystick (25) in any direction to change the camera’s view.
Set Preset
•Press Function (9), then press Number (11) for the number of the desired preset.
Press Preset (7).
Go To Preset
•Press Number (11) for the number of the desired preset. Press Preset (7).
41 Connection port - used to connect power to the ADCC0200/ADCC0300, and data to a switching
system.
42 Termination/Biasing switches - used to terminate and/or bias an RS485 network.