User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
138 Appendices
14 Alarm acknowledge key - acknowledges/clears an alarm displayed on the currently active
monitor.
15 Focus Near/Focus Far key - adjusts the lens focus for the selected camera.
16 Open/Close Iris key - opens/closes the lens iris for the selected camera.
17 Zoom In/Zoom Out key - zoom in or zoom out with the selected camera.
18 Search key - places a DVR into search mode.
19 Telemetry enable/disable key - allows telemetry control.
NOTE: When the joystick is moved, the keyboard automatically enters telemetry mode.
20 Reverse play key - places a VCR/DVR into reverse play mode.
21 Pause key - places a VCR/DVR into pause.
22 VCR/DVR Select key - calls a VCR/DVR to control.
23 Rewind key - places a VCR/DVR into rewind.
24 Fast forward key - places a VCR/DVR into fast forward.
25 Joystick -
ADCC0200 2-axis joystick enables you to pan and tilt the selected camera.
ADCC0300 3-axis joystick enables you to pan, tilt, and zoom the selected camera.
26 Enter key - used when in Program mode.
27 Record key - places a VCR/DVR into record mode.
28 Stop key - stops playback of a VCR/DVR.
29 Start key - starts playback of a VCR/DVR.
30 Auxiliary 1 key - toggles Auxiliary 1 between ON state and OFF state.
31 Auxiliary 3 key - toggles Auxiliary 3 between ON state and OFF state.
32 Autopan key - starts autopan function for the selected camera (if function is available).
33 Auxiliary key -toggles Auxiliary between ON state and OFF state (if function is available).
34 Flip key - automatically runs the selected dome through 180°.
35 Auxiliary 2 key - toggles Auxiliary 2 between ON state and OFF state.
36 Auxiliary 4 key - in RS485 mode, momentarily switches auxiliary 4 from its OFF state to its ON
state for the period the key is held down. In RS323 mode, toggles Auxiliary 4between ON state
and OFF state.
37 Last/Decrement key - in Tour hold mode, steps backwards through the tour. IN VCR mode,
reduces playback or record speed.
38 F1/F2 key - special function keys used to implement basic system commands and dome control.
39 Next/Increment key - in Tour hold mode, steps forward through the tour. In VCR mode,
increases playback or record speed.
40 Quickset key - allows dome features for new American Dynamics domes to be called to the
keyboard.