User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index

User’s Manual
132 Appendices
Direction Keys:
Up, Down, Left, Right /
Pan/Tilt Keys
In Zoom mode or OSD (display), they function as
Direction keys. In Playback mode, Left and Right
are reverse video and forward video, Up is Go To
(search by Date/Time), Down is Event List.
In Dome Control Mode, the Direction keys are used
to pan and tilt a camera (move the camera
horizontally and vertically, respectively.)
Enter / Zoom In a menu or selection interface, the Enter key
makes the selection or saves settings. In a display
mode (e.g., a specific camera selected), it functions
as a Zoom key. In Dome Control Mode, this is an
Automatic Focus and Iris Control key.
Lock /
Iris Close
Press for 3 seconds to lock the key panel and/or
DigiRemote keypad. To unlock the key panel and
pad, press again for 3 seconds.
In Dome Control Mode, press to close the iris on the
selected camera.
Seq /
Focus Near
Press to enter automatic sequential sequencing
display mode.
In Dome Control Mode, press to focus the selected
camera nearer to the camera’s location.
Mode /
Zoom In
Press to change the display mode. The display
mode can be changed to full-screen, quad (four),
nine, or sixteen window displays.
In Dome Control Mode, press to zoom in, or see less
information in the selected camera’s view.
Esc (Escape) Press to cancel or exit from certain modes
and menus.
Set Used to assign a camera to one of the windows on
the monitor.
Press this SET button to toggle Dome Control Mode
while in Full Screen Display Mode.
When you are in Dome Control mode, press Set to
access the Run Pattern menu. For more information,
see
Running Patterns on page 31.
Menu /
Iris Open
Press to call the OSD Main Menu.
In Dome Control Mode, press to open the iris on the
selected camera.
FUNCTION KEY DESCRIPTION