User`s manual

DigiMux
Appendices 131
The DigiRemote has an IR range of approximately 12 ft. (4 m.), depending on
environmental conditions.
DigiRemote Function Keys
The function keys on your DigiRemote correspond to functions on your DigiMux.
Remember to press SET to enter Dome Control Mode from Full Screen Display Mode,
and ESC to return.
The function keys are described in the following table:
FUNCTION KEY DESCRIPTION
Camera or Channel keys
(1 - 16)
Use to view specific camera views, or select specific
cameras in OSD menus. The number of active keys
corresponds to the number of channels supported
by the unit (4, 9 or 16 channels).
Go Preset In Dome Control Mode, use after you have set up
preset camera views with the Set Preset function.
Go Preset allows you to call the preset for viewing.
Set Preset In Dome Control Mode, use to set up dome control
preset positions. DigiMux allows you to set up to 99
preset positions. Press the Direction keys to move
the Dome to an appropriate position. Press Set
Preset to enter the OSD menu, where you can press
keys 1 through 10 and name the preset positions.
Toggle Hint Screen Use to toggle the Hint Screen that contains the
dome control help information. Press 3 to hide the
screen. Press 3 again, in Dome Control mode, to re-
display the screen.
Playback /
Zoom Out
Press to playback recorded video.
In Dome Control Mode, press to zoom out, or see
more information in the selected camera view.
Pause /
Focus Far
Press to freeze the image on the monitor.
In dome control mode, press to focus the camera on
a point farther away from the camera.