User`s manual

DigiMux
Appendices 127
Setting up this connection on the DigiMux unit:
1. Press Menu and enter your Admin passcode in the User Authorization screen.
2. From the Main Menu, select 7 Administrator Setup.
3. From the Administrator Setup menu, select 8 Dial In/Out.
4. From the Dial In/ Out menu, select 3 Change Dial-In User Name. In the
Dial-In User Name screen, enter the user name for the above PC connection. The
default user name is admin. If you assigned a different name, the name on the
unit must match the name on the PC. Remember that the user name is case
sensitive. Select Exit or press ESC when the name is completed.
5. From the Dial In/ Out menu, select 4 Change Dial-In User Password. In the
Change Dial-In User Password screen, enter the password for the above PC
connection. The default password is 1234. If you assigned a different password,
the password on the unit must match the password on the PC. Select Confirm
and enter the password again. Select Confirm again or press ESC when
confirmation is complete.
6. From the Dial In/ Out menu, select 2 Dial-In IP. If you are allowing DigiMux to
assign an IP address to the PC for this connection, then use the default setting for
Auto assign Remote IP. The default setting is ON.
If you are using a static IP address on your PC and you do not want the DigiMux
to assign an IP address for this connection, then select OFF for Auto assign
Remote IP and enter the IP address for this connection in the Remote IP field.
7. Press ESC until the Exit menu is displayed, then select 1 Save and Exit.
Using the Dial-Up Connections
To operate DigiClient using the dial-in connection to the DigiMux:
1. Click Start, Settings, then Network and Dial-up Connections, and click the To
DigiMux connection, or the name of the connection that you created.
2. When the connection to the unit is made, start your Internet Browser and enter
the Local IP address of your DigiMux in the Address field. DigiClient download
then begins.
Dial-out to the PC from the DigiMux takes place when an event occurs and Remote
Notification, DigiAlert (Dial) is enabled.