User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
Maintenance 99
MAINTENANCE
PREVENTIVE TIPS
• This unit is designed for indoor use. Do not use it near water or steam, or in other
extremely humid conditions, or near a source of oil vapor.
• Take care not to drop the unit or subject the unit to major shocks or jolts.
• Keep a suitable distance around system components to allow for proper air
convection.
• Always power down the system prior to connecting and disconnecting
accessories, with the exception of USB devices.
• If shipping the unit, make sure to package it properly for protection.
SHUTDOWN AND POWER UP
If you need to shut down your unit for any reason, use the procedures in this section
to avoid damage to your unit.
Shutdown and Power Up, or Reboot
If you must shut down your unit and restart it, or reboot the unit, follow this
procedure:
•Press 4 + ESC simultaneously to shut down.
Please wait for the unit to shut down properly before removing the power. During
shut down, the color bar is displayed on the monitor. The function key LEDs are lit,
then turn off. The monitor and fan then shut down. Only the power light is lit when
the unit is shut down.
To restart the unit:
• Press and hold 1 + ESC for 3 seconds.
The blue splash screen is displayed on the monitor and the front panel keys light up
in sequence until the unit is completely restarted.