User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
DigiMux
System Information and Administration 97
LAN Information
The LAN Information menu displays your local area network setup parameters, or
LAN parameters. This information is read-only. Administrators can configure the
LAN using the Administrator LAN Setup (see
LAN Setup on page 79).
NOTE: Administrator’s Passcode is required to perform LAN setup.
From the Main Menu, select LAN Information and press Enter. The following menu is
displayed:
Items in the LAN Information menu are described in the following table:
LAN Information
1 DHCP OFF
2 IP
3 Netmask
4 Gateway
5 DNS
6 Email Address
MENU ITEM DESCRIPTION
DHCP (Dynamic Host Configuration Protocol)
Displays whether or not DHCP is in use. By default, it is not
(OFF). If you are using DHCP, the IP address changes each time
the unit is booted on the network.
IP Displays the IP (Internet Protocol) address of the DigiMux unit.
Netmask Displays the unit’s 32-bit netmask.
Gateway Displays the IP address of the default gateway or router
associated with this DigiMux.
DNS Displays the IP address of the Domain Name System provider.
Email Address Displays E-mail address to which alarm event information is
sent, if this capability is enabled. Select Email Address to see the
address listed below the menu. See
Event Response on page 61
for more information about enabling E-mail notification.