User`s manual

DigiMux
System Information and Administration 87
DATABASE SETUP
The Database Setup item on the Administrator Setup menu enables you to add Hard
Disk Drives into or remove Hard Disk Drives from the video database. Hard Disk
Drives can include USB Hard Disk Drives, or up to two ESM modules. The setup
options are also used to format a specified Hard Disk Drive.
From the Administrator Setup menu, select Database Setup and press Enter. The
following menu is displayed.
Max Dial-Out Retry Indicates the number of times DigiMux dials-out via the
modem if the first attempt to connect is unsuccessful.
DigiMux retries the number until a connection is made or
the specified value is reached. The default setting is 03.
Retry Delay Indicates the amount of time between dial-out retries. The
delay can be set in the range of 01 sec to 10 sec. The
default setting is 05 sec, which specifies that DigiMux
waits 5 seconds between each retry.
Minimum Dial-Out
Interval
Indicates the shortest amount of time between ending a
connection and the next dial-out with this modem, thus
allowing the modem to adjust. The value can be set in the
range of 05 min to 60 min. The default setting is 30 min.
Max Dial-Out Idle
Time
Indicates the longest amount of time that the modem
connection remains active if there is no acknowledgement
from the remote PC. The value can be in the range of 01
min to 30 min. The default setting is 03 min.
Max Dial-Out Time Indicates the longest amount of time that the connection
via modem remains active. The value can be in the range
of 01 min to 60 min, or OFF if you want the connection
indefinitely. The default setting is 10 min.
MENU ITEM DESCRIPTION
Database Setup
1 Add HDD into Database
2 Remove HDD from Database
3 Format HDD