User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
86 System Information and Administration
If you want to assign a static IP address to your PC for this modem connection with
the DigiMux, you must inform the DigiMux unit of your PC’s assigned IP address. I n
this case, do not allow the DigiMux to perform an automatic assignment. For more
information on forming a network connection with a remote PC, see your Windows
Operating System online documentation.
Modem
The Modem menu allows you to add your modem to the DigiMux system
configuration. From the Dial-In/Out menu, select Modem and press Enter. The
following menu is displayed
NOTE: Your modem has a specific initialization string. See your modem
documentation for this information.
Items in the Modem menu are described in the following table:
Modem
1 Add Modem
2 Remove Modem
3 Initial String
4 Max Dial-Out Retry 03
5 Retry Delay 05 sec
6 Minimum Dial-Out Interval 30 min
6 Max Dial-Out Idle Time 03 min
7 Max Dial-Out Time 10 min
MENU ITEM DESCRIPTION
Add Modem Adds a modem to a USB port on the DigiMux unit. One
modem can be attached to a single unit. If there is no
modem attached, Modem Not Found is displayed.
Remove Modem Removes a modem from a USB port on the DigiMux unit.
When no modem is detected, Modem Removed is
displayed.
Initial String Allows you to enter an initialization string for your
modem. Use the virtual keyboard to enter the string. For
information on your modem’s initialization string, see the
documentation that accompanies your modem.