User`s manual

User’s Manual
84 System Information and Administration
DIAL IN/OUT
The Dial In/Out option enables you to establish dial-up modem communication to and
from a DigiMux unit for remote notification and DigiClient use. Dial In/Out also
allows you to establish passwords for the dial-in and dial-out connections. You can
connect one modem to a DigiMux unit.
NOTE: The information in this manual discusses the DigiMux setup for modem
connection only. You will need to set up a connection from your PC. Some
guidelines for PC setup are provided in
Dial-Up Connections via Modem on
page 123. For more information on dial-up modem configuration, see your
Windows Operating System online documentation.
From the Administrator Setup menu, select Dial In/Out and press Enter. The following
menu is displayed.
Items in the Dial In/Out menu are described in the following table:
Dial In/Out
1 Dial-In ON
2 Dial-In IP
3 Change Dial-In User Name
4 Change Dial-In User Password
5 Change Dial-Out User Name
6 Change Dial-Out User Password
7 Modem
MENU ITEM DESCRIPTION
Dial-In Enables (ON) or disables (OFF) a computer to dial in via
modem to the DigiMux unit, as in the operation of DigiClient.
The default setting is ON.
Dial-In IP Allows you to enter the IP addresses for both the DigiMux and
the modem dial-in for the PC. See
Dial-In IP, below, for more
information.
Change Dial-In
User Name
Enables you to protect your unit by establishing or changing a
dial-in user name for your modem connection.
Change Dial-In
User Password
Enables you to protect your unit by establishing or changing a
dial-in user password for your modem connection.
Change Dial-Out
User Name
Enables you to enter your PC log in user name, which is used
while dialing out to your remote PC.