Specifications

32
ADCC0200 and ADCC0300
Clearing Patterns
If a dome supports the clear pattern feature, then this operation will delete the programmed
pattern. To clear a pattern:
1. Press the FUNCTION (
) key.
2. Enter the pattern number using the numeric keys.
3. Hold down the SHIFT ( ) key and press the PRESET ( ) key.
4. Enter the pattern number using the numeric keys.
5. Press the FUNCTION ( ) key.
Initiating F2 Key Commands (RS232 only)
The Function and F1 keys on the keyboard can be used along with the numeric keyboard
inputs to accomplish special functions within the MegaPower 48 system. Refer to the
MegaPower 48 documentation for a listing of supported commands.
To perform an F2 special function key command:
1. Enter the number for the command using the numeric keys.
2. Hold down the FUNCTION (
) key.
3. Press the F1 (
) key.
Intelligent Security & Fire