Specifications

24 Simplex Multiplexer
Record mode is the only mode affected by the motion detec-
tion feature. Images are sent to tape more often from cameras
where activity is detected when motion targets are ON.
In one camera recording mode, an encoded full-screen image
from the selected camera is output to the VCR at the pro-
grammed time-lapse rate.
If REC ALL displays, press FUNCTION and a CAMERA button
to start recording just one camera.
Four-camera models only: if REC QUAD displays, press a
CAMERA button to get back to full-screen display and into
REC ALL mode. Then press FUNCTION and a CAMERA but-
ton to start recording just one camera.
When in one camera record mode, the on-screen record status
message is 1 CAM=XX (XX stands for the camera number). The
FUNCTION LED flashes when just one camera is being re-
corded. Images from the other cameras will NOT be recorded
unless associated with a mechanical alarm.
Alarms A full-screen live image from the camera associated with the
alarm is displayed on the main and call monitors. The main
monitor also displays an ALARM graphic unless the ALARM
MESSAGE DISPLAY toggle option is set to OFF. Multiple
alarms will sequence full screen on both monitors. Cameras
associated with alarms are sent to the VCR more often. See
Chapter 6 — Alarms for details.