Specifications

20 Simplex Multiplexer
Global Dwell
The GLOBAL DWELL menu allows you to set the camera
switching rate. The GLOBAL DWELL setting determines the
rate at which the cameras are sequenced full screen when se-
quence (up arrow) is selected. It also determines the rate the
monitor switches cameras during multiple alarms.
Set the GLOBAL DWELL time in seconds using the up and down
arrow buttons. You may enter any setting between 1 and 99
seconds. This setting applies to all cameras.
NOTE: The GLOBAL DWELL setting only affects the on-screen
camera display. It does NOT affect the rate at which
camera images are sent to the VCR.
The default GLOBAL DWELL setting is 02 SECS.
When you are finished with this menu, do one of the following:
• press VCR VIEW to go to the next menu.
• press FUNCTION+VCR VIEW to save the settings and exit
setup.
Camera Titles Menu
The Camera Titles menu allows you to assign an alphanumeric
title to each camera input. It also provides access to the mo-
tion detection setup screen.
The camera number is the default title. To change a title, use
the arrow buttons to position the flashing highlight on each
character and set its value. A title can contain up to 10 charac-
ters selected from the following: 0–9, A–Z, :, /, +, - or space.
When you are finished setting a title, do one of the following:
• press FUNCTION to display the motion detection screen (de-
scribed below) for the current camera.
• press a CAMERA button to set that camera’s title.
• press VCR VIEW to set the next camera title.
• press VCR VIEW after the last camera title to go to the next
menu.
• press FUNCTION+VCR VIEW to save the information and
leave the setup system.