Specifications

Chapter 3 — Installation 9
Chapter 3 — Installation
Select a location for the product that is clean and dry and has
AC power. Find an environment where temperature and hu-
midity extremes do not exceed the product specification (see
Appendix D — Technical Specifications). Failure to do so can re-
sult in equipment failure and/or loss of warranty protection.
REQUIRED
CONNECTIONS
Connect the cam in BNC connector to the video output of a
camera or other composite video source. Set input impedance
termination using the switches between the rows of BNC con-
nectors. If looping through to other equipment, set the switch
to
∞∞
∞∞
∞.
Cameras
Main Monitor
Connect main mon to the video input of an NTSC/EIA or
PAL/CCIR compatible video monitor. The monitor must be
properly terminated.
Power
Connect the power module or other center positive 12 VDC
source with at least 1 amp capacity to the power connector.
OPTIONAL
CONNECTIONS
Connect call mon to the video input of an NTSC/EIA or
PAL/CCIR compatible video monitor. The monitor must be
properly terminated.
Call Monitor
VCR In
The vcr in connector accepts composite video from a VCR.
Connect this input to the composite video output (play) of an
NTSC/EIA or PAL/CCIR compatible VCR. The vcr in input
is terminated.
VCR Out
The vcr out connector provides composite video to a VCR.
Connect this output to the composite video input (record) of
an NTSC/EIA or PAL/CCIR compatible VCR. The VCR must
be terminated.