Operator`s manual

Working with Controller Utilities
The following topics cover the different controller utilities.
Topic Page Number
Adjusting LCD Brightness 6-7
Turning Key Click Sound On / Off 6-8
Adjusting Key Click Volume 6-8
Locking or Unlocking the Multiplexer Front Panel 6-8
Changing the Alarm Acknowledgement Setting 6-9
Displaying System Information 6-9
Note: You may also change the language setting, designate Primary or
Secondary controller, configure the external device, and set the password.
These topics are covered in Chapter 2.
Adjusting LCD Brightness
If you find it difficult to see items displayed on the controller LCD, you may want to adjust
its brightness setting.
1. Press Menu.
2. Scroll through the menu items until Adj Backlighting appears on the LCD.
Press Zoom or Focus to select.
3. Press Previous and Next to change the setting.
• Previous makes the backlighting dimmer.
• Next makes the backlighting brighter.
4. When finished making changes, press Menu to resume camera control mode.
Using System Utilities and Solving Problems 6-7