Operator`s manual

Figure 6-2: SpeedDome Ultra
VII 22x DirectSet Menu
0 TOGGLE QUICK SET MENU
1 DOME CONFIG MENU
2 AUTO IRIS/AUTO FOCUS
3 FLIP
4 PEEL PATTERN
15 SMOOTH SCAN
16 STEPPED SCAN
17 RANDOM SCAN
20 DOME INFO
Figure 6-3: SpeedDome Ultra VII
Day/Night DirectSet Menu - Page 1
0 TOGGLE QUICK SET MENU
1 DOME CONFIG MENU
2 AUTO IRIS/AUTO FOCUS
3 FLIP
4 PEEL PATTERN
10 NIGHT MODE
11 DAY MODE
12 AUTO DAY/NIGHT MODE
13 WDR ON
14 WDR OFF
FOCUS FAR = next page
Figure 6-4: SpeedDome Ultra VII
Day/Night DirectSet Menu - Page 2
15 SMOOTH SCAN
16 STEPPED SCAN
17 RANDOM SCAN
20 DOME INFORMATION
FOCUS NEAR = previous page
Table 6-1 provides a description of the different DirectSet menu options.
* Options 10-14 apply to SpeedDome Ultra VII Day/Night domes only.
Table 6-1: DirectSet menu options
DirectSet Command /Menu Item Description
0+Info: Toggle Quick Set
Menu
Toggles between displaying and hiding the
DirectSet menu.
1+Info: Dome Config Menu
Displays the SpeedDome Ultra configuration
menu. Refer to the dome manual for
information about the available settings.
2+Info: Auto Iris/Auto Focus
Resumes Auto Focus/Auto Iris mode.
3+Info: Flip
Rotates the SpeedDome 180° from its current
pointing direction. This is the same as pressing
the Flip button.
4+Info: Peel Pattern
Runs the default Apple Peel Pattern. This is
the same as pressing the Peel button.
* 10+Info: Night Mode
Sets the dome IR mode setting to ON. The
dome switches to full-time black-and-white
(B/W) mode.
* 11+Info: Day Mode
Sets the dome IR mode setting to OFF. The
dome switches to full-time color mode.
* 12+Info: Auto Day /
Night Mode
Resumes the most recently selected automatic
IR mode setting.
• Auto High: B/W mode activates ~30 lux.
• Auto Mid: B/W mode activates ~3 lux.
• Auto Low: B/W mode activates ~ .5 lux
* 13+Info: WDR ON
Enables Wide Dynamic Range (WDR). Use
this setting when both bright and low light
areas need to be viewed simultaneously.
Using System Utilities and Solving Problems 6-5