Operator`s manual

Testing Dome/Controller Communications
1. Press Menu.
2. Scroll through the menu items until Ping Dome / TTR appears on the LCD. Press Zoom
or Focus to select.
3. The LCD displays the dome communication (ping) test information.
Ping Dome
Tx=0010 Bad=0000
Number of pin
g
messa
g
es sent
Number of failed
messages
4. Press Next to display the controller ping test information.
Ping Other TTR
Tx=0006 Bad=0006
Number of pin
g
messa
g
es sent
Number of failed
messages
5. Make note if any of the tests fail. Press Menu to exit.
IMPORTANT!
The number of failed messages should be equal to zero. If a number appears in
this field, contact your service representative for instructions.
Displaying the Dome DirectSet Menu
SpeedDome Ultra VII and other suitably equipped domes provide a DirectSet menu to
access commonly used features. Depending upon the dome type, different DirectSet menu
options will be available.
The Info button on the ADTT16E controller is used to display this menu.
Figure 6-1: Displaying SpeedDome Ultra VII (or other suitably equipped dome) DirectSet Menu
3
4
56
789
0
C
D
Previous
Next
Pattern
Repeat
Pattern
View
Flip
1
A
B
Peel
Info
On
Off
Output
Clear
Menu
Close
Iris
Open
Press to displa
y
the DirectSet
menu
6-4 ADTT16E Advanced Dome Controller Operator's Manual