Operator`s manual

Assigning Cameras to Multiplexer Display Windows
1. Press until the display format you want to change appears on the monitor.
2. Press
to start setup mode. The word Set and a highlight box appears on the screen.
Figure 5-3: Example multiplexer display programming screen.
SET
Selected
windo
w
3. Use the Tracker Ball to move the highlight box to the window you want to set.
4. Enter the camera number and press
to assign the camera to the highlighted window.
5. Repeat steps 3 and 4 for each window you want to setup. When finished press D (to right
of LCD display) to exit setup mode.
Quest Multiplexer Support 5-5