Operator`s manual

The blinking square on the LCD represents the cursor's location. Move the Tracker Ball up
and down to move between inputs for the selected camera. Move the
Tracker Ball left and
right to move the cursor between the fields.
The controller keypad is also used during alarm programming. Figure 4-4 illustrates the
controller keypad; Table 4-4 describes which keys are used.
Figure 4-4: Controller keys used with alarm programming
3
4
56
789
0
C
D
Previous
Next
Pattern
Repeat
Pattern
View
Flip
1
A
B
Peel
Info
On
Off
Output
Clear
Menu
Close
Iris
Open
Table 4-4: Keys used with alarm programming
Keys Used Description
Numeric keypad
Enters the alarm response camera, Quick View or Pattern, and the
triggered output numbers.
Pattern
Changes the assigned action to a pattern.
View
Changes the assigned action to a Quick View or fixed shot. Leave
the View number blank for fixed shots.
Previous
Displays previous alarm camera in series for additional
programming.
Next
Displays next alarm camera in series for additional programming.
Clear
Erases the information for the selected field. This allows the event
to be reprogrammed or skipped.
Navi
g
ate to previous
or next camera for
p
ro
g
rammin
g
.
Enter numbers
Clear field
Assign Pattern
A
ssi
g
n Quick View
or fixed shot
Programming Controller Functions 4-9