Operator`s manual

Controlling Dome Outputs

Output devices are hardware components connected to dome outputs that can be operated by

the controller. Typical output devices include gates, door strikes, and lights. Depending upon

the dome type, as many as four output devices may be connected. The output control

buttons on the controller activate or deactivate the output devices connected to the

currently selected dome. Figure 3-14 illustrates the location of these buttons.

Figure 3-14: Output control buttons

789

Pattern

Repeat

Pattern

View

Flip

Peel

Info

Off

Output

Clear

Iris

Open

The following procedure describes how to activate or deactivate a dome output. You must

know the dome number and the output number before performing this procedure.

1. Select the camera whose output state you want to control.

2. Enter the output number, and press an output control button.

Action LCD Information

Press Output On to activate

Press Output Off to deactivate

The controller beeps if an invalid output number or non-existent output number is

entered.

Tip: Up to 64 output devices can be configured at a single facility. Post a copy

of the Inputs / Outputs Worksheet found in the Programming Worksheets

(8200-0306-04) next to the controllers to help operators determine which

outputs are available.

Cam 13 +

Output Off

Cam 13 +

Output On

Press to deactivate

the selected dome

output.

Press to activate the

selected dome

output.

3-16 ADTT16E Advanced Dome Controller Operator's Manual