Operator`s manual

To run a pattern:
1. Select the camera where the Pattern is saved.
2. Enter the Pattern number, and press a pattern button.
Action LCD Information
Press Pattern to run the Pattern
once.
Cam 8 +
Run Pattern
Pattern finished.
Press Repeat Pattern runs the
Pattern indefinitely until manually
stopped.
Cam 8 +
Pattern Done
Cam 8 +
Repeat Pattern
Notes
If the selected Pattern has been programmed, the Pattern automatically runs. If
the Pattern has not been programmed, the default Apple Peel pattern runs. See
Running the “Apple Peel” Pattern on page 3-11 for a description.
The controller beeps if a Pattern for a non-programmable dome or if an invalid
Pattern number (any number greater than 3) is entered.
3-14 ADTT16E Advanced Dome Controller Operator's Manual