Operator`s manual

Selecting and Controlling Cameras
Each camera has been assigned a unique number. To select a camera, enter the camera
number and press
(Camera button). Figure 3-2 illustrates the location of the Camera
button.
Figure 3-2: Camera button
3
456
789
0
C
D
Previous
Next
Pattern
Repeat
Pattern
View
Flip
1
A
B
Peel
Info
On
Off
Output
Clear
Menu
Close
Iris
Open
Full-screen video from the selected camera appears on the monitor. The associated camera
number appears in the bottom left corner of the monitor. If the camera is selected via the
Primary Controller, video appears on the Main monitor. If the camera is selected via the
Secondary Controller, video appears on the Call monitor.
How the System Resolves Conflicts in Camera Control
If the configuration includes two controllers, the Primary Controller will always have camera
control priority over the Secondary Controller. The Primary Controller “locks” the selected
camera, and the Secondary Controller will only be able to display its video on the Call
monitor. The following situations may occur:
Situation Message on Secondary Controller
The Secondary Controller attempts to
control a camera that is currently selected
by the Primary Controller.
Camera In Use
The Primary Controller selects a camera
currently controlled by the Secondary
Controller. The Primary Controller secures
control of the camera.
Camera Override
Enter a camera
number and press
to select a camera.
3-6 ADTT16E Advanced Dome Controller Operator's Manual