Operator`s manual

Changing the External Device Setting
IMPORTANT
Only the Primary Controller can be used to perform this task.
1. Press Menu.
2. Scroll through the menu items until Config Devices appears on the LCD.
Press
Zoom to select the first line of the LCD, or Focus to select the second line.
3. The LCD displays the current setting. Press
Next to display the device types.
4. When the correct device appears on the top line of the LCD, press
Menu to save the
device setting.
Using Passwords to Restrict System Access
When initially installed, the ADTT16E system provides full system programming authority
to anyone with access to the Primary Controller. This configuration is suitable if you are not
concerned about users changing system features, such as Quick Views, Patterns, or
Sequences. If this is the case, continue with programming other system features.
However, if you do not want all users to have the ability to program system features,
implement password protection. This allows you set three system access levels:
Administrator level, Programmer level, and User (Operator) level. In order to use the
system, the appropriate 4-digit code must be entered on the controller when the Enter
Password prompt appears on the LCD.
Note: Passwords are separate for each controller. If two controllers are
installed, you may choose to implement passwords on one controller but not the
other. If you forget the password, contact your American Dynamics
representative for instructions.
To implement password protection, program the Administrator password first. After the
Administrator password is set, program the Programmer and Operator passwords.
2-6 ADTT16E Advanced Dome Controller Operator's Manual