Operator`s manual

Configuring the External System
The controllers are capable of interfacing with a number of different external devices. The
Primary Controller must be configured to communicate with the correct device for the
system to operate correctly. Table 2-2 lists the available settings.
Table 2-2: List of Configure Device settings
Device Setting Description
Device=Quad
=POSEM
Quad processor
Device=Mux 4
=POSEM
Standard 4-channel multiplexer
Device=Mux 9
=POSEM
Standard 9-channel multiplexer
Device=Mux 16
=POSEM
Standard 16-channel multiplexer
Device=Mux 4
=Duplex
4-channel Quest Duplex multiplexer
Device=Mux 9
=Duplex
9-channel Quest Duplex multiplexer
Device=Mux 16
=Duplex
16-channel Quest Duplex multiplexer.
Device=Mux 10
=Triplex
10-channel Quest Triplex multiplexer
Device=Mux 16
=Triplex
16-channel Quest Triplex multiplexer.
PC
Reserved for service use.
Remote
Use this option if the controller is installed at a remote
location and communicates at 1200 baud.
None
No external device is connected.
Changing Configuration Settings 2-5