Operator`s manual

Changing the Primary/Secondary Controller Setting

IMPORTANT

If only one controller is installed, it must be configured as the Primary Unit.

1. Press Menu.

2. Scroll through the menu items until Tog Primary/2nd appears on the LCD.

Press

Zoom or Focus to select.

Tip: Zoom selects the first line of the LCD; Focus selects the second line.

3. If configured as the Primary Controller, the LCD displays:

If configured as the Secondary Controller, the LCD displays:

Primary Unit

Change w <Next>

Secondary Unit

Change w <Next>

4. Press Next to change the controller setting. Each time Next is pressed, the display

toggles between Primary Unit and Secondary Unit.

789

Pattern

Repeat

Pattern

View

Flip

Peel

Info

Off

Output

Clear

Iris

Open

Press Next to switch between

Primary and Secondary Mode.

5. Press Menu to save the setting. If the setting changed, the controller restarts to activate

the new setting.

2-4 ADTT16E Advanced Dome Controller Operator's Manual