Operator`s manual

Controller Operating Modes
The ADTT16E controller functions differently depending upon the current operating mode.
Five operating modes are available:
• Camera control mode
• Menu/programming mode
• Sequence mode
• Alarm mode
• Quest multiplexer control mode
Camera Control Mode
Camera control mode is the normal operating mode for the controller. In camera control
mode, the currently selected camera number and any running Pattern or Quick View appears
on the LCD. The Tracker Ball functions as the camera pan/tilt controller, and the zoom and
focus buttons control the zoom and focus of the currently selected camera. The following
tasks can be performed in camera control mode:
• Change the display format for viewing video on the main monitor
• Select individual cameras and display their video on the call monitor
• Manually control cameras
• Initiate automatic system functions
Menu/Programming Mode
Pressing the Menu button on the keypad activates menu/programming mode. In this mode,
the LCD displays the available menu items, and the
Tracker Ball scrolls through the items.
There are always two menu items visible at one time on the LCD
The zoom and focus buttons are used to select the menu items. The
zoom buttons (left of
Tracker Ball) selects the first line of the LCD. The focus buttons (right of Tracker Ball)
selects the second line of the LCD.
Figure 1-3: Operating in menu/programming mode
1
2
3
4
5
6
7
8
9
0
I
r
i
s
A
B
P
e
e
l
I
n
f
o
O
n
O
u
t
p
u
t
O
f
f
C
l
e
a
r
M
e
n
u
C
l
o
s
e
O
p
e
n
C
D
F
l
i
p
V
i
e
w
P
a
t
t
e
r
n
R
e
p
e
a
t
P
a
t
t
e
r
n
S
e
q
P
r
e
v
i
o
u
s
N
e
x
t
The LCD displays the
menu items.
Zoom selects the
first line of the LCD.
The Tracker Ball scrolls
throu
g
h the menu.
Focus selects the
second line of the LCD.
1-6 ADTT16E Advanced Dome Controller Operator's Manual