Specifications

24
MegaPower LT
Linking Tours Together
The Tour Link Set Up screen is used to link two tours together to make a single tour with
up to 32 positions. Up to eight tour links can be made.
To create a tour link, follow the steps below:
1. In the View menu, select the Tour Link Set Up option.
2. In the Tour Link Set Up screen, use the down joystick command to select one of the
eight tour link numbers.
3. Using the numeric keys, enter the number of the first tour to be displayed.
4. Use the right joystick command or the ENTER key to move to the right half of the
field.
5. Using the numeric keys again, enter the number of the second tour to be linked to
the end of the first tour.
6. Use the right joystick or the ENTER key to move to the next tour link number.
7. Repeat steps 2 to 6 to create any further tour links.
8. Once amendments on this screen are complete, select the Return to View Menu
option.
Using a Keyboard to Recall Tours
Once tours have been programmed to the MegaPower LT, they can be recalled using a
connected keyboard. To do this, follow the steps below:
1. Using the numeric keys, enter the number of the tour to be recalled.
2. Press the SEQUENCE (
) key.
4.3 Tour Link Set Up
1: 01 - 02
2: 00 - 00
3: 00 - 00
4: 00 - 00
5: 00 - 00
6: 00 - 00
7: 00 - 00
8: 00 - 00
Return to View Menu