Specifications

Search and Retrieve

4 Select OK. The search is saved as an alarm rule and will be available for selection on

Motion Detection or Video Intelligence searches.

- End -

Load Alarm Rule

Load Alarm Rule allows you to load a previously configured alarm rule from a VideoEdge NVR

4.2+ recorder. victor uses information from the NVR rule to apply search criteria to the victor client

search. Search parameters are populated from the rule but can be edited if required.

Note

Load Alarm Rule feature is not available on Face Detection or Edge Analytic searches

Procedure 12-6 

Load Alarm Rule

Step Action

1 Select Search and Retrieve from the Home tab

2 Select Execute Search Wizard. The Search and Retrieval Wizard launches

3 Select Motion Detection or required Video Intelligence search type from the Type of

Search drop down menu

4 Drag and drop camera(s) from the Device, Site or Vault list onto the Camera Selector

Pane

Note

If selecting cameras from the Vault List, Date and Time parameters are

automatically populated

5 Specify Date and Time parameters in the Date and Time Pane

Note

Selecting Specific Range also allows selection of Time Filter options. Time Filter

options can be used to specify a sub-set of time to search. For example, only

search between 9am and 5pm. Select the Time Filter checkbox to enable

6 Select Next. The Search Parameters screen displays

7 Select required Alarm Rule from the Load from Alert Rules list

8 Search parameters are populated with Alarm Rule parameters. If required, edit search

parameters

9 Select Next. The Confirmation screen displays. Confirm your search criteria are correct.

Select Previous to return to the previous screen to make changes. Select Finish to

execute the search