Specifications

Search and Retrieve
76 victor 4.4 Installation and Configuration Guide
Linger Find objects lingering in a region
of interest. An object is lingering
if it is mostly stationary.
Set the minimum amount of time
an object must linger before
being included in the results.
Draw a region in the area to be
searched for lingering objects.
Use a higher overlap setting to
avoid finding objects lingering
nearby.
Overlap (Sensitivity level) - A
lower value will return more
results
Linger Time - Minimum amount
of time an object lingers before
being included in results.
4.2+
Enter Find objects entering a camera
view through a doorway or
threshold.
Draw a region containing the
doorway or threshold and any
area around it through which
objects can be seen (like glass).
Also include any area through
which the door (if there is one)
might move. This search
excludes objects that can be
seen through the doorway or
threshold but do not pass
through it.
Overlap (Sensitivity level) - Use
a higher overlap setting for best
results.
4.2+
Exit Find objects exiting a camera
view through a doorway or
threshold.
Draw a region containing the
doorway or threshold and any
area around it through which
objects can be seen (like glass).
Also include any area through
which the door (if there is one)
might move. This search
excludes objects that walk up to
the doorway but do not pass
through it.
Overlap (Sensitivity level) - Use
a higher setting to avoid finding
nearby changes or changes
which are not completely within
the region
4.2+
Abandoned/
Removed
Use this search to find when a
stationary object was placed,
moved or removed. The amount
changed lets you search for
larger or smaller changes in the
region.
The within setting specifies over
what time period changes can
occur (0 seconds =
instantaneous change).
Draw a region that contains all of
the area that you wish to search
for changes, and use a higher
overlap setting to avoid finding
nearby changes or changes that
are not completely in the region.
Overlap (Sensitivity level) - Use
a higher overlap to avoid finding
nearby changes or changes that
are not completely in the region
Amount Changed - Adjust to
look for a larger or smaller
change in the region.
Within - Timeframe within which
the change occurs.
4.2+
Face
Detection
Use this search to find when a
face is present in video.
Draw a region that contains all of
the area that you wish to search
for faces and use higher overlap
settings to avoid finding faces
nearby.
Overlap (Sensitivity level) - Use
a higher overlap to avoid finding
nearby faces or faces that are
not completely in the region
4.4+
Advanced
Search
Type
Description Search Parameter(s) VideoEdge
Version
Supported