Specifications

Search and Retrieve
75
10 Search and Retrieval Wizard closes and the Advanced Search Results tab opens
displaying search results. Double click on a search result to view associated video
- End -
Perform a Video Intelligence Search
VideoEdge NVR recorders support Search Analytics. This gives users the ability to detect, track
and analyze moving objects using a variety of criteria. Refer to the table below for further
information on the various types of Video Intelligence searches and which versions of VideoEdge
NVR support them.
In order to perform Video Intelligence searches, this must be enabled on the recorder and in some
cases, on the specific camera required. Refer to the VideoEdge NVR User Manual for further
information.
Advanced
Search
Type
Description Search Parameter(s) VideoEdge
Version
Supported
Object
Detection
Find objects that move into a
region of interest. This is similar
to a normal motion detection
search except that it only finds
objects the first time they enter
the region.
If the objects leave the camera
view and return, the search will
find them again.
Draw a region that covers the
area to be searched for objects.
Use a higher overlap setting to
find objects that are mostly within
the region, use a lower setting to
find objects that just brush the
edge of the region.
Overlap (Sensitivity Level) - A
lower value will return more
results.
4.2+
Direction Find objects moving in a certain
direction through a region of
interest.
Set the general direction of
motion to search for, and the
maximum amount of time the
object can take to traverse most
of the region (this excludes
objects which move too slowly).
Draw a thin region in the
direction of motion required. Use
a lower overlap setting to find
objects moving in the general
direction but not necessarily in
the region.
Overlap (Sensitivity level) - A
lower value will return more
results.
Traversal Time - Maximum time
an object can take to traverse the
region.
Direction of Motion - The
direction, North, South, East or
West which the object is moving.
4.2+