Specifications

Search and Retrieve
74 victor 4.4 Installation and Configuration Guide
4 Drag and drop a camera from the Device, Site or Vault list onto the Camera Selector Pane
Note
If selecting a camera from the Vault List, Date and Time parameters are
automatically populated
5 Specify Date and Time parameters in the Date and Time Pane
Note
Selecting Specific Range also allows selection of Time Filter options. Time Filter
options can be used to specify a sub-set of time to search. For example, only
search between 9am and 5pm. Select the Time Filter checkbox to enable
6 Select Next. The Search Parameters screen displays
Note
The video stream reverts to the start time selected for the search. To view live
video, select
7 Select the required Draw Style and draw a Region of Interest (ROI):
• Polygon: Draw a polygon by clicking once on the image and dragging the
cursor to form a line. Complete a line by clicking again. Repeat to form the ROI.

Double click when the shape is complete to finalize the search area. Use Clear
to restart drawing and Erase to correct errors.
• Rectangle: Highlight the ROI by clicking and dragging the cursor over the
camera view to form a rectangle. Use Clear to restart drawing and Erase to
correct errors.
• Free Draw: Draw the ROI freehand on the camera view. Use Clear to restart
drawing and Erase to correct errors.
Note
1. By default the ROI drawn is the Active Region, this can be inverted by
selecting Invert Selection.

2. The full camera view can be selected as the Active Region by selecting Select
All.

3. Load Alarm Rule allows you to load a previously configured rule from a
VideoEdge NVR 4.2+ recorder. victor uses information from the NVR rule to apply
search criteria to the victor client search. Search parameters are populated from
the rule but can be edited if required. Refer to
Alarm Rules for more information
on alarm rules
8 Adjust Parameters as required to suit your search type. Available Parameters are
dependent on recorder type
9 Select Next. The Confirmation screen displays. Confirm your search criteria are correct.
Select Previous to return to the previous screen to make changes. Select Finish to
execute the search