Specifications

Search and Retrieve
70 victor 4.4 Installation and Configuration Guide
Thumbnail search is supported on VideoEdge NVR 4.4+, Intellex and HDVR recorders only.
Motion Detection Search
Motion detection search allows users to search for motion in a specific cameras field of view. This
allows the user to skip directly to areas that may be of interest, rather than having to search
through hours of video in order to search for a particular event.
Note
1. Motion detection based searches and motion based alarms are handled differently within the
client. Motion detection based searches are independent of motion alarm regions set up on a
recorder.


2. Motion detection based searches performed on the client from a VideoEdge NVR do not search
actual video footage, but rather metadata generated by the NVR. Search results are therefore
dependent on the sensitivity level settings when the video was processed. If no motion metadata is
generated for a particular time period, no results will be returned when searching on that time
period.


3. Motion detection searches performed on the client from Intellex units search actual video
footage so results depend on sensitivity settings set in the client.


4. Motion detection searches are not available on HDVR or ADTVR units.
Video Intelligence Search
Video Intelligence Search is supported on VideoEdge NVR 4.2+ recorders. This gives users the
ability to detect, track and analyze moving objects using a variety of criteria. The Video Intelligence
engine is licensable on a per-channel basis. Supported Video Intelligence searches are:
• Detection
• Direction
• Linger
• Enter
• Exit
• Abandoned/Detected
• Face Detection (4.4+)