Specifications

Call Up Configuration
66 victor 4.4 Installation and Configuration Guide
10 If required, use and to change the step position of cameras.
Note
Presets and Patterns are only available to add if they are already configured on
the Recorder. They cannot be configured via the client. If available, they can be
added by selecting them from the Pattern or Preset textboxes and selecting from
the dropdown list.
11 Change the default Pane number by selecting the Pane dropdown for each Camera/Tour.
- End -
Edit Salvos/Saved Views
You can make various changes to salvos and Saved Views. They can be edited to change
attributes including Name, Description, Dwell Times, Add/Remove objects and Layouts (Saved
Views only)
Procedure 11-4 
Edit Salvos/Saved Views
Step Action
1 Select Salvos from the Build tab.
2 Select Show All from the dropdown menu.
3 Right click the Salvo/Saved view to be edited.
4 Select Edit. The Salvos editor displays.
5 Edit the Name and Description in the General Section.
Note
The Enabled checkbox is selected by default, to deactivate the tour, deselect the
checkbox.
6 Edit Cameras and Layouts as required in the Salvo section.
7 Select Save.
- End -