Specifications

Call Up Configuration
65
6 The Enabled checkbox is selected by default, to deactivate the tour, deselect the
checkbox.
7 If required change the Default dwell time in the Defaults section. This is the dwell time
used for each camera added.
8 Within the Tour section, use to remove cameras, and use and to change the
step position of cameras.
9 Edit existing camera’s attributes by changing Preset, Pattern or dwell settings for each
camera.
10 Add more cameras by dragging them from the Sites or Recorders list as required.
11 Select Save.
- End -
Create Salvos/Saved Views
Tours, Cameras and Recorders can all be added to Salvos. Presets and Patterns may be assigned
to cameras if they have already been defined on the recorder.
Procedure 11-3 
Create Salvo/Saved View
Step Action
1 Select Salvos from the Build tab.
2 Select New from the dropdown menu.
3 Enter a Name in the Name textbox.
4 Enter a description in the Description textbox.
5 The Enabled checkbox is selected by default, to deactivate the tour, deselect the
checkbox.
6 Select a Layout from the Layout dropdown if the Salvo is to be a Saved View.
Note
1. The selected layout must contain enough video panes to accommodate the
number of video streams you intend to add to the Salvo.

2. Saved view can also be created directly from current surveillance views by
selecting Save as Saved View .
7 Navigate to the required objects to be added to the salvo.
8 Select and drag Recorders/Cameras/Tours into the right hand pane.
9 If required, use to remove items from the camera list.