Specifications

Call Up Configuration
64 victor 4.4 Installation and Configuration Guide
5 The Enabled checkbox is selected by default, to deactivate the tour, deselect the
checkbox.
6 If required change the Default dwell time in the Defaults section. This is the dwell time
used for each camera added.
Note
Dwell times may be changed for individual cameras within a tour by changing the
dwell time in the Tour section.
7 Select the tab in which the cameras to be added are located.
8 Select the camera to be added.
9 Drag the camera to be added into the right hand pane.
10 Repeat steps 8-9 as required.
11 Modify dwell times as required for individual cameras by double clicking the dwell value
and changing it.
Note
Presets and Patterns are only available to add if they are already configured on
the Recorder. They cannot be configured via the client. If available, they can be
added by selecting them from the Pattern or Preset textboxes and selecting from
the dropdown list.
12 If required, use to remove items from the camera list.
13 If required, use and to change the step position of cameras.
14 Select Save.
- End -
Edit Tours
You can edit the properties of existing tours.
Procedure 11-2 
Edit Tours
Step Action
1 Select Tours from the Build tab.
2 Select Show all from the dropdown menu.
3 Right Click the Tour to be edited.
4 Select Edit. Tour editor displays.
5 Edit Name and Description in the General section.