Specifications

Recorder Configuration
42 victor 4.4 Installation and Configuration Guide
Recorders - General
Alarm Persistence
VideoEdge NVR constantly caches alarms from the previous 2 weeks data. This means if an NVR
loses connection to the site manager, alarms are resent upon reconnection in Recovery Mode.
Upon Reconnection, notification is sent to victor that Alarm recovery is in progress and also
informs whether it has been successful.
Users must run a Video Alarm report to access the alarms triggered during the lost connection.
Alarm Persistence can be disabled from the Server Configuration Application.
Procedure 7-6 
Disable Alarm Persistence
Step Action
1 Right Click the Server Configuration Application on the desktop
2 Select Run as Administrator. Application opens
3 Select the Settings Tab
4 Select Skip Recovered Events Checkbox in the Application Settings section
Note
If the status of the Skip Recovered Events is changed while the VideoEdge
Driver service is running, it must be stopped and restarted before changes take
effect.
- End -