Specifications

Recorder Configuration
41
Edit Recorders
You can edit properties of existing recorders.
Procedure 7-4 
Edit Recorders
Step Action
1 Select Recorders from the Setup Tab.
2 Select Show All. All recorders are listed.
3 Right Click on the recorder to be edited.
4 Select Edit. The Recorder editor displays.
5 Make edits as required.
Note
Properties which can be edited vary depending upon recorder type.
6 Select Save.
- End -
Configure VideoEdge NVR
victor client supports full configuration of VideoEdge NVR (4.2+).
Procedure 7-5 
Configure VideoEdge NVR
Step Action
1 Select Recorders from the Setup Tab.
2 Select Show All. All available recorders are listed.
3 Right Click the recorder to be configured.
4 Select Configure. The recorder’s configuration page opens.
5 Refer to the recorders User/Administrator guide for configuration help.
- End -