Specifications

Recorder Configuration
39
Add new Recorder (WAN)
You can add supported WAN recorders to the site manager.
Procedure 7-2 
Add new Recorder (WAN)
Step Action
1 Select Recorders from the Setup Tab.
2 Select New from the dropdown menu.
3 Enter the IP Address/Domain Name of the recorder.
Note
1. If adding a VideoEdge NVR 4.4+ recorder with failover set up, enter the virtual
IP address of the recorder. It is also recommended that the secondary (failover)
NVR 4.4+ recorder is added to victor separately using its static IP address to
ensure that all alerts are received.

2. If using a domain name, then it is recommended that a DNS server is used to
allow both the client and the site manager to resolve the device name. It is NOT
recommended to use local host files to resolve device names.Enter the
Communication Port. This can be left blank of default ports have not been
changed.
4 Enter the User Name, if required.
5 Enter the Password, if required.
Note
1. A Username and Password is required when adding VideoEdge NVR units.
2. If adding Intellex 5 recorders with Remote Access Authorization enabled, a
Username and Password is required.

3. It is recommended that an Administrator account is used when adding
Recorders to ensure that full access is available via the client.
6 Enter the Streaming Port, if required.
7 Expand the WAN Configuration section.
8 Enter the Enter the IP Address/Domain Name of the recorder.
9 Enter the Communication Port.
10 Enter the Streaming Port.
11 Select Save.
- End -