Specifications

General Purpose Interface
225
Procedure 35-4 
Add New Protocol
Step Action
1 Select Protocol from the Setup tab
2 Select New. General Purpose Protocol editor displays
3 Enter a name for the protocol in the Name textbox
4 Enter a description for the protocol in the Description textbox
5 Select Match Criteria from the drop down menu
6 Enter a Keyword
7 Enter the Position
8 Repeat steps 5-7 to add more protocols, up to a maximum of 5
9 Select Save
- End -
Keyword
(1-5)
Enter a keyword (max 50 characters) from this
message protocol.
Note
ASCII Hex 00 (Zero Zero) cannot be used in a
keyword
Position
(1-5)
Enter a position for the keyword:
Value >0 (Zero) - the software device receiver
searches for the keyword only at this position when
mapping a message
Value =0 (Zero) - the keyword can be at any
position in the message (default)
Example: To find “CDE” in the string “ABCDE”, the
Keyword value should be “CDE” and the Position
value, “3”
Note
Spaces and unprintable characters such as carriage
returns (<CR>) or line feeds (<LF>) must be
counted