Specifications

General Purpose Interface
220 victor 4.4 Installation and Configuration Guide
Create New Device
Third Party Devices can be created and configured within the client.
Field Description
Name Enter a unique name to identify the General
Purpose Device.
Description Enter a description of the General Purpose Device.
Enabled Select checkbox to enable the General Purpose
Device.
Vendor Click to select the name of the manufacturer of the
General Purpose Device.
Poll Period (seconds) Enter the period in seconds during which victor
attempts to poll this General Purpose Device. The
default value is 10 seconds.
Poll Command Enter the poll command (command string) that victor
sends to the General Purpose Device.
Open the virtual keyboard by selecting ,
allowing creation and editing of text strings.
Poll Command Acknowledgement Enter a poll command acknowledgement (the
command string) that the General Purpose Device
sends back to victor as acknowledgement of the poll
message.
Open the virtual keyboard by selecting ,
allowing creation and editing of text strings.
Journal Unknown Message Select this option to record unknown messages
received by victor in the historical journal
Serial Port Select Serial Port if you are using a serial
connection. This is the default port type.
Network Port Select Network Port if you are using a terminal
server for the connection.
IP Address Enter the TCP/IP address of the network port
Note
This option is only available if you select the
Network Port option.
Communication Port Enter the port number:
• Serial Port - enter a port number such as COM1,
COM2, etc.
• Network Port - enter the TCP/IP port number
which the terminal uses to communicate with
victor
Reconnection Period (secs) Enter the duration in seconds before trying to
reconnect to an unresponsive network device.
Note
This field is only available if you select the Network
Port option