Specifications

Analog Matrix
205
15 If required, double click the default COM Port and select an alternative from the
dropdown.
Note
1. If a COM port is already in use by another device it will appear greyed out in the
dropdown list. You can view which device is using the COM port from the tool tip.

2. Select Blank to have no COM port assigned.
16 If required, double click default Baud Rate and select and alternative from the dropdown
list.
17 If required, double click the default Playback Monitor and select an alternative from the
dropdown list.
18 To change the default value for Playback to Analog Matrix:
a Double click Playback to Analog Matrix.
b Select or deselect the Enabled checkbox to enable or disable the feature.
c Enter the Matrix Input value as required.
19 Expand the Inputs and Analog Matrix Configuration section. This section is used to
configure camera mappings and assign pseudo numbers to analog inputs.
20 Associate video streams as required by dragging cameras or recorders from the device
list into the Inputs Configuration list.
21 Expand the Satellites section.
22 Drag required satellite sites from the device list into the Satellites list.
- End -
Reconnect to Analog Matrix
If victor loses connection to an analog matrix you can attempt reconnection.
Procedure 32-2 
Reconnect to Analog Matrix
Step Action
1 Select next to Analog Matrices in the device list. All Analog Matrices display.
2 Right click the Analog Matrix to reconnect.