Specifications

Analog Matrix
204 victor 4.4 Installation and Configuration Guide
Satellite Sites - (MP3200 only) MP3200 matrices permit satellite site configuration, permitting a
site to access the resources of one or more remote sites.
Note
1. Before adding an analog matrix, you should ensure it is correctly configured via its supporting
configuration application (Easy CPU for MP3200 and Easy 48 for MP48)

2. Any video stream and monitor resources configured during the victor setup are always
considered available to the associated victor workstation.

3. victor does not poll analog matrices for status. Once added, it is always expected to be
available.
Add Analog Matrices
You can add preconfigured analog matrices to victor.
Note
Before adding an analog matrix, you should ensure it is correctly configured via its supporting
configuration application (Easy CPU for MP3200 and Easy 48 for MP48)
Procedure 32-1 
Add Analog Matrices
Step Action
1 Select Analog Matrix from the Setup tab.
2 Select New from the dropdown menu.
3 Enter a name for the matrix in the Name textbox.
4 Enter a description for the matrix in the Description textbox.
5 The Enabled checkbox is selected by default, deselect to disable.
6 Expand the Analog Matrix Setup section. Use the Model dropdown menu to select the
required model.
7 Enter the Site number in the Site textbox. (only available for MP3200)
8 Enter the number of cameras in the Camera Count textbox.
9 Enter the number of monitors in the Monitor Count textbox.
10 Enter a Username in the User Name textbox.
11 Enter a password in the Password textbox.
12 Check the Requires Authentication checkbox if you require users to authenticate before
accessing the analog matrix.
13 Expand the Workstation Connections section.
14 Select the workstation to associate the analog matrix to. The current workstation is
automatically populated in the list. To add further workstations, drag them from the device
list.